Anglais 
Espagnol 
Allemand 
Français 
Italien 
The H-535 Nozzle is a simple, one-piece construction. The unique “V” notch milling and oval orifice produce a very thin, high velocity cutting sheet found to be ideal for car washes, commercial dish washers and other applications where spray velocity is important.
Material: Brass, 303 Stainless Steel. Other materials, to order.
Spray Angles: 30° to 90° in 10° steps at 40 PSI.
Pipe Connection: 1/8″ and 1/4″ NPT male.
| H-535 Capacities: Gallons Per Hour | |||||
| Figure
No. |
Lift
(inches) |
Air Pressure:
Lbs. Per Square Inch |
|||
| 5 | 10 | 12 | 15 | ||
| H-601 | 6 | 1.3 | 2.5 | 2.8 | 3.3 |
| H-601 | 3 | 2.4 | 3.6 | 4.0 | 4.4 |
| H-601-G | 6 | .13 | .20 | .22 | .24 |
| H-601-F | 6 | .24 | .33 | .34 | .39 |
| H-601-E | 6 | .45 | .67 | .68 | .70 |
| H-601-D | 6 | .65 | 1.1 | 1.15 | 1.2 |
| H-601-C | 6 | 1.1 | 1.8 | 2.0 | 2.2 |
| AIR-SCFM | Any | .9 | 1.3 | 1.5 | 1.7 |
| H-535 Capacities: Gallons Per Minute | |||||||
| Nozzle
No. |
Operating Pressure: Lbs. Per Square Inch | ||||||
| 10 | 20 | 30 | 40 | 60 | 80 | 100 | |
| .20 | .14 | .17 | .20 | .25 | .28 | .32 | |
| .35 | .24 | .30 | .35 | .43 | .49 | .55 | |
| .40 | .28 | .34 | .40 | .49 | .56 | .63 | |
| .44 | .31 | .38 | .44 | .54 | .62 | .70 | |
| .50 | .35 | .43 | .50 | .62 | .70 | .79 | |
| .60 | .30 | .42 | .52 | .60 | .73 | .85 | .95 |
| .75 | .37 | .53 | .65 | .75 | .93 | 1.1 | 1.2 |
| .90 | .45 | .64 | .78 | .92 | 1.1 | 1.3 | 1.4 |
| 1.0 | .50 | .71 | .86 | 1.0 | 1.2 | 1.4 | 1.6 |
| 1.3 | .65 | .92 | 1.1 | 1.3 | 1.6 | 1.8 | 2.1 |
| 1.5 | .75 | 1.1 | 1.3 | 1.5 | 1.8 | 2.1 | 2.4 |
| 2.0 | 1.0 | 1.4 | 1.7 | 2.0 | 2.5 | 2.8 | 3.2 |
| 2.0 | 1.5 | 2.1 | 2.6 | 3.0 | 3.7 | 4.2 | 4.7 |
| 4.0 | 2.0 | 2.8 | 3.5 | 4.0 | 4.9 | 5.7 | 6.3 |
