Oil Burner Nozzles

hp TECHNIK Industrial Pumps

Just another WordPress site

H-261

7.7

H-261The H-261 direct pressure operated Nozzle produces a very fine hollow cone spray similar to tde F-80 Nozzle. However, it has a 1/4″ male NPT tdread, so no adaptor is needed, and it can be connected directly to a 1/4″ Tee.

Material: All Brass, witd 120 mesh Monel Strainer.

Spray Angles: 45°, 60°, 80°. Sizes #3.0 to #9.50 available in 120°. All ratings are at 40 PSI.

Material: Both models, all Brass. “M” only also available in Plastic.

Pipe Connection: 1/4″ NPT male.

H-261 Capacities: Gallons Per Hour
Nozzle No. Operating Pressure: Lbs. Per Square Inch Min. Oper.
Pressure (PSI)
25 40 60 80 100 200
.75 - .40 .50 .60 .65 .90 40
1.00 - .45 .60 .65 .75 1.05 40
1.25 - .50 .65 .75 .85 1.20 40
1.35 - .55 .70 .80 .90 1.25 40
1.65 - .75 .90 1.05 1.20 1.70 40
2.00 - .95 1.15 1.30 1.50 2.10 35
2.50 - 1.15 1.40 1.60 1.80 2.55 30
3.00 1.00 1.25 1.55 1.80 2.00 2.85 25
3.50 1.30 1.65 2.00 2.30 2.60 3.65 25
4.00 1.50 1.90 2.35 2.70 3.00 4.25 20
4.50 1.90 2.40 2.95 3.40 3.80 5.40 20
5.00 2.20 2.80 3.40 3.95 4.40 6.20 20
5.50 2.40 3.05 3.70 4.30 4.80 6.80 15
6.00 2.60 3.30 4.05 4.65 5.30 7.50 15
6.50 2.80 3.55 4.35 5.00 5.60 7.90 15
7.00 3.00 3.80 4.65 5.35 6.00 8.50 15
7.50 3.20 4.05 4.95 5.75 6.40 9.05 10
8.50 3.50 4.45 5.40 625 7.00 9.90 10
9.50 3.80 4.80 5.90 6.80 7.60 10.75 10
10.50 4.10 5.20 6.35 7.35 8.20 11.60 10
12.00 4.80 6.05 7.45 8.60 9.60 13.60 10
13.50 5.45 6.90 8.45 9.75 10.90 15.40 10
15.50 6.35 8.00 9.85 11.40 12.70 18.00 10
17.50 7.20 9.10 11.20 12.90 14.40 20.40 10
19.50 8.80 11.10 13.60 15.70 17.60 24.90 10
21.50 10.50 13.30 16.30 18.80 21.00 29.70 10
24.00 11.80 14.90 18.30 21.20 23.60 33.30 10
30.00 15.00 19.00 23.20 26.90 30.00 42.40 10

H-261

Print Friendly