Industrial Pumps and Special Pumps Index

hp TECHNIK Industrial Pumps

Just another WordPress site

Series VBR with integrated overflow valve and bypass

1.3

Industrial Pumps

Technical selection chart: scaled drawings

Direction of rotation viewed from shaft

I = indirect – counterclockwise

D = direct – clockwise

The direction of rotation can only be changed in the factory. Therefore please assure that you state the desired direction of rotation as per the size chart/sheet when ordering!

hp-Internal gear pumps up to 40 bar

(direction I = indirect – counterclockwise)

Pump
series
VBR
Size:		 Viscosity: 6 mm2 sec -1 bei 20 °C    rotor
size
Ø		 Shaft
Ø		 connection
for (S/A/R)		 connection allowed
pump RPM
(min -1)
at I/D		 weight
(kg)
at I/D
n = 1400 min -1
Discharge l/h		 n = 2800 min -1
Discharge l/h
at
9 bar		 at
30 bar		 at
40 bar		 Article-no.
I		 at
9 bar		 at
30 bar		 at
40 bar		 Article-no.
I
VBR P 45 30 20 011/0011   90 60 50 013/0011 25 12 3/8“ – 2800 2.5
VBR M 80 60 50 011/0012 160 130 120 013/0012 25 12 3/8“ – 2800 2.5
VBR G 120 100 80 011/0013 240 200 190 013/0013 25 12 3/8“ – 2800 2.5
VBR F 160 140 120 011/0014 320 270 260 013/0014 25 12 3/8“ – 2800 2.5
                             
VBGR PP 150 100 80 011/0065 300 240 210 013/0040 38 12 1/2“ – 2800 3.3
VBGR PZ 200 160 140 011/0062 400 310 280 013/0041 38 12 1/2“ – 2800 3.3
VBGR P 300 240 200 011/0025 600 520 480 013/0023 38 12 1/2“ – 2800 3.3
VBGR MZ – – – – 850 750 700 013/0072 38 12 1/2“ – 2800 3.3
VBGR M 450 390 360 011/0026 900 850 730 013/0024 38 12 1/2“ – 2800 3.3
VBGR GZ – – – – 1100 1000 870 013/0042 38 12 1/2“ – 2800 3.3
VBGR G 600 540 480 011/0027 1200 1080 960 013/0043 38 12 1/2“ – 1680 3.3
                             
VBHR P 1000 700 600 011/0037 – – – – 56 18 3/4“ 1/8“ 1680 7.3
VBHR M 1500 1200 1000 011/0038 – – – – 56 18 3/4“ 1/8“ 1680 7.3
VBHR G 2000 1700 1400 011/0039 – – – – 56 18 3/4“ 1/8“ 1680 7.3
                             
VBHGR P 3000 2200 2000 011/0049 – – – – 75 22 1 “ 1/4“ 1400 18.6
VBHGR PZ 3700 3000 2700 011/0090 – – – – 75 22 1“ 1/4“ 1400 18.6
VBHGR M 4500 3600 3200 011/0050 – – – – 75 22 1“ 1/4“ 1400 18.6
VBHGR G 6000 4800 – 011/0051 – – – – 75 22 1“ 1/4“ 1400 18.6

hp-Internal gear pumps up to 40 bar

(direction D = direct – clockwise)

Pump
series
VBR
Size:		 Viscosity: 6 mm2 sec -1 bei 20 °C Gear
rotor
size
Ø		 Shaft
Ø		 Threaded
connection
 for (S/A/R)		 Manometer
connection		 Heating
capacity
H1 in Watt
at 220V, 50Hz
at I/D		 Initial
pump
breakaway
torque
at I/D
n = 1400 min -1
Discharge l/h		 n = 2800 min -1
Discharge l/h
at
9 bar		 at
30 bar		 at
40 bar		 Article-no.
I		 at
9 bar		 at
30 bar		 at
40 bar		 Article-no.
I
VBR P 45 30 20 012/0011   90 60 50 014/0011 25 12 3/8“ – 100 1.2
VBR M 80 60 50 012/0012 160 130 120 014/0012 25 12 3/8“ – 100 1.2
VBR G 120 100 80 012/0013 240 200 190 014/0013 25 12 3/8“ – 100 1.2
VBR F 160 140 120 012/0014 320 270 260 014/0014 25 12 3/8“ – 100 1.2
                             
VBGR PP 150 100 80 012/0065 300 240 210 014/0040 38 12 1/2“ – 100 1.6
VBGR PZ 200 160 140 012/0062 400 310 280 014/0041 38 12 1/2“ – 100 1.6
VBGR P 300 240 200 012/0025 600 520 480 014/0023 38 12 1/2“ – 100 1.6
VBGR MZ – – – – 850 750 700 014/0072 38 12 1/2“ – 100 1.6
VBGR M 450 390 360 012/0026 900 850 730 014/0024 38 12 1/2“ – 100 1.6
VBGR GZ – – – – 1100 1000 870 014/0042 38 12 1/2“ – 100 1.6
VBGR G 600 540 480 012/0027 1200 1080 960 014/0043 38 12 1/2“ – 100 1.6
                             
VBHR P 1000 700 600 012/0037 – – – – 56 18 3/4“ 1/8“ 160 3.2
VBHR M 1500 1200 1000 012/0038 – – – – 56 18 3/4“ 1/8“ 160 3.2
VBHR G 2000 1700 1400 012/0039 – – – – 56 18 3/4“ 1/8“ 160 3.2
                             
VBHGR P 3000 2200 2000 012/0049 – – – – 75 22 1“ 1/4“ 280 4.6
VBHGR PZ 3700 3000 2700 012/0090 – – – – 75 22 1“ 1/4“ 280 4.6
VBHGR M 4500 3600 3200 012/0050 – – – – 75 22 1“ 1/4“ 280 4.6
VBHGR G 6000 4800 – 012/0051 – – – – 75 22 1“ 1/4“ 280 4.6

*To insure proper pump functioning, all pipe connections must be sized as per the principles of fluid technology using the phase quantity and in accordance with the given conditions at the installation site! The size of the pump and/or device connections is not indicative of the size of the pipe connection which must be used.

Print Friendly