 |
|
hp- Programmable pump controller Series µ Con II
The µ Con II controller is suitable for deployment with single and double pump systems in continuous or intermittent operation (pressure control only). The number of pumps, the level or pressure switching points and the filling time of the plant are stored. In the program code as standard values, but can be altered and permanently saved within the configuration menu to suit specific customers’ requirements.
In the standard version, a connected load of up to PM = 1,5 kW is possible. Additionally, for loads of P > 1,5 kW, a power base-unit is provided which is clamped to the pump controller and constitutes the base unit of the modular system. Thus a power transmission up to P ≤ 4,0 kW is possible. |
| |
 |
|
 |
|
Fuel oil leakage detector HMS
For monitoring leakages. Consisting of a plug-and-socket case with control unit and optical sensor with angel mount for installation in an oil leakage sump.
connection: 230 V, IP 20
display: operation mode- green; alarm indication signal- red
cable length: 2 m |
| |
|
|
 |
|
Fuel oil leakage detector HMW
| cable length |
Article-No. |
|
720705 |
| 2 m |
720721 |
| 10 m |
720722 |
| 30 m |
720724 |
For monitoring leakages. Consisting of switch box with control unit and optical sensor with angel mount for installation in an oil leakage sump.
| connection: |
230 V, IP 20 |
| display: |
operation mode- green; alarm indication signal- red |
Detector with floating output. |
| |
|
|
 |
|
Pressure maintaining valves (components not tested)
| connection |
Article-No. |
| G 3/8" |
0820370 |
Fixed at 3 bar. After removing of the lead seal, pressure is adjustable. |
| |
|
|
 |
|
Safety valves
| connection |
Article-No. |
| G ½" and 1" |
0820372 |
approved as per TV
Fixed at 3 bar. Not adjustable.
|
| |
|
|
 |
|
Solenoid valve, Series D 21
| connection |
DN |
Throughput (l/h) |
Article-No. |
| G 3/8" |
15 |
160 |
820241 |
| G ½" |
15 |
600 |
820242 |
| G ¾" |
15 |
2000 |
820243 |
| G 1" |
25 |
6000 |
820244 |
current-freely closed, direct controlled
230 V, 50 Hz for fuel oil EL
pmax: 0 - 10 bar |
| |
|
|
 |
|
Solenoid valve (DIN and TV checked)
| |
connection |
DN |
Throughput (l/h) |
Article-No. |
| Plug with rectifier |
G 3/8" |
10 |
200 |
0820256 |
| Plug with rectifier |
G ½" |
10 |
600 |
0820257 |
| with a seperate rectifier |
G ¾" |
15 |
1000 |
0820258 |
| with a seperate rectifier |
G 1" |
15 |
2000 |
0820259 |
| with a sep. rectifier (without TV) |
G 1 ¼" |
20 |
4500 |
0820260 |
current-freely closed
suitable for sucking site
for fuel oil EL
pmax: -1 -16 bar
Lucifer valves available, please call. |
| |
|
|
 |
|
Regulator for fuel oil EL
| connection |
Throughput (l/h) |
Article-No. |
| G ¼" |
180 |
0820185 |
| G 3/8" |
480 |
0820186 |
| G ½" |
1200 |
0820187 |
| G ¾" |
1800 |
0820188 |
| G 1" |
2400 |
0820188 |
pressure after regulator: adjustable 0,1 - 1 bar with manometer
adjustable 0,2 - 2,5 bar with manometer
Admission pressure: max. 10 bar |
| |
|
|
 |
|
EG 1 series
The single filter with screw-on connection
| connection: |
G ½" up to 2" |
| Material |
GGG 40, G-CuSn10/12 |
| Working overpressure: |
up to 16 bar |
| Filter element: |
filter basket |
| Filter fineness: |
100 and 540 μm, other finenesses upon request |
| Options: |
- heating (steam/thermal oil, electrical)
- magnetic elements
- seperate differential pressure indicator/switch |
|
| |
|
|
 |
|
EG 2 series
The single filter with flange connection
| connection: |
DN 20 to DN 150 |
| Material |
GGG 40, stainless steel casting 1.4581 |
| Working overpressure: |
up to 16 bar |
| Filter element: |
filter basket, filter catridge |
| Filter fineness: |
100 and 540 μm, other finenesses upon request |
| Options: |
- heating (steam/thermal oil, electrical)
- magnetic elements
- differential pressure indicator/switch mounted on the filter
- internally coated or rubberised |
|
| |
|
|
 |
|
UG 54 series
The standard filter with cack change-aver facility
| connection: |
DN 20 to DN 80 |
| Material |
GGG 40, G-CuSn 10/12 |
| Working overpressure: |
up to 10 bar |
| Filter element: |
filter basket |
| Filter fineness: |
100 and 540 μm, other finenesses upon request |
| Options: |
- heating (steam/thermal oil, electrical)
- magnetic elements
- differential pressure indicator/switch mounted on the filter |
|
| |
|
|
 |
|
Filter elements
A number of filter elements are available for all AKO, Boll & Kirch, Annello and Oventrop
Filters. Material, shape, filtration area and fineness are optimised to suit the medium.
Performance is optimised to suit the filtration task requirements. |
Back 