hp-TECHNIK Twin Pumping Unit Series BIK

Twin pumping unit for fuel oil in scewed or flanged compact execution, as a feed- or delivery aggregates for oil supply of automatic oil burners - equivalent DIN/EN 4755/2. Produced, tested, registered and marked according to the test standard DIN/EN 12514/1.

Order text
Single Pumping Unit Series BIK
Series MOG:	…… Refer to key
Discharge:	…… l/h
Medium:	……
Working pressure:	…… bar
Motor:	…… kW …… V/50 Hz
Accessoires:	…… Series key_ax

Key for determination of the order numbers:

Series	Size		Accessories*
50 = feed pump aggregate (6 bar and 9 bar),¹⁾ fuel oil EL + L, Kerosene 51 = feed pump aggregate (9 bar), fuel oil M, S + ES, coaltar oil 52 = delivery aggregate (30 bar), fuel oil EL + L, Kerosene	Discharge see chart	FL = flanged execution	A = pump and filter with electrical stationary heating and connecting box (only for Scheme 1) RV = overflow valve (only for Scheme 2) DK = double ball valve (only for MOG 52) E1 = with optical filter indicator (only for flanged execution "FL") E2 = with optical and electrical filter indicator (only for flanged execution "FL") LH = oil leakage detection Type HMW S¹⁾ = electrical pressure switch for pipe burst monitoring and dry running protection DT = pressure transmitter

* Listening classification letters after each other
1) For use as feed pump aggregat for the supply with fuel oil per DIN 4736 do not exceed the working pressure of 6 bar.

Note: it is absolutely imperative that the user install an electric pressure switch (acting as a "lower limit controller"), as pipe pressure safety device, on the equipment to which the pump is to be connected. This prerequisite can be met by ordering accesory "S" and "DT".

Back | Products| MOG & BIK | Next

hp-TECHNIK · Gablonzer Str. 21 · 76185 Karlsruhe · Tel (49) 721/956 18-0 · Fax (49) 721/956 18-28

FREE hp-TECHNIK Catalog on CD-ROM! Click here